Cleaning and maintenance of aluminum composite panel

Cleaning and maintenance of aluminum composite panel

The baking varnish of aluminum-plastic panels requires regular professional cleaning and maintenance. This cleaning can not only keep the walls of the building clean and beautiful, but also remove the dirt damaged by the paint on the painted surface to ensure the long-term quality of the paint. Manual or appropriate cleaning equipment should be used to clean the walls of the building from top to bottom. Do not use any corrosive materials to scrub the painted surface.

 

The specific cleaning steps are as follows:

 

(1) First rinse the surface of the board with plenty of water

 

(2) Gently wipe the surface of the board with a soft cloth dipped in water thinner.

 

(3) Wash the boards with plenty of water to wash away the stolen items.

 

(4) Check the surface of the circuit board, and then clean the detergent with detergent.

 

(5) Wash the circuit board with water until all detergent is washed

 

When cleaning the aluminum-plastic composite panel (the temperature exceeds 40 degrees Celsius), do not clean the hot plate, because excessive moisture evaporation will affect the baking effect. It is important to pay attention to the use of appropriate cleaning agents. The basic principle is to choose a detergent. Do not use strong alkaline cleaners (such as sodium hydroxide, potassium hydroxide or sodium carbonate), strong acid cleaners, corrosive cleaners, and paint-soluble cleaners. In addition, before cleaning a large area, it is best to choose a small board for testing, and then officially start using it after confirming the safety.

 

Maintenance of aluminum-plastic panels after wall decoration

 

(1) The aluminum-plastic panel shall not be peeled off before the completion of construction to avoid scratching the surface during operation.

 

(2) The surface of the mirror aluminum composite panel is smooth and clean, and dust is not easy to adhere. It can be wiped 2-3 times a month. When wiping, do not use nylon brushes, loofah and volatile solvents or hydrochloric acid cleaner Otherwise, the mirror surface will be damaged. It is best to use a soft cloth, an ordinary glass with a neutral detergent or a cleansing oil from China National Petroleum Corporation.

 

(3) If the aluminum-plastic composite panel is used in a place with high outdoor humidity and easy to fog, you must use a soft cloth to gently wipe the mist to maintain a lasting bright effect.